Description

Product characteristics:

Specification		BRPV3-1000-12.5VG
SPD classification according to EN61643-31 / IEC61643-31		Type 1 + Type 2 / Class I + Class II
Max. continuous operating d.c. voltage	Ucpv	1200V
Lightning impulse current (10/350μs)	Iimp	12.5kA
Nominal discharge current (8/20μs)	In	25kA
Max. discharge current (8/20μs)	Imax	60kA
Voltage protection level [(DC+/DC-)→PE]	Up	≤4.0kV
Response time	tA	≤25ns
Operating temperature range	Tu	-40℃-80℃
Operating state / fault indication		green / red
Cross-section area (Min.)		4mm²
Cross-section area (Max.)		35mm²
For mounting on		35mm Din rail
Enclosure material		Thermoplastic UL94-V0
Degree of protection		IP20
Order code		B18002
Order code (with remote signal)		B18004

Features:

Category: Class I + Class II / Type 1 + Type 2.

Lightning impulse current(10/350us):12.5kA.

Location of use: Photovoltaic systems – PV module side.

Protective elements: High energy MOV and GDT.

Protection modes: (+) → PE, (-) → PE, (+) → (-).

Conform to IEC61643-31 and EN61643-31.

Application:

Surge protection device for the protection of photovoltaic systems from direct and indirect lightning discharge.

Available for photovoltaic applications with a generator voltage of up to 1200 V.

For photovoltaic systems on/on buildings with external lightning protection.

Available as type 1 and type 2 combined lightning current and surge arresters as well as type 2 only surge arrester protective devices.

Installation instruction:

These units must be installed in parallel on the DC networks to be protected and provide common mode protection.

DC surge arrester are designed to protect equipment connected to DC power supplies from lightning surges.

These protectors are recommended when a direct lightning strike is possible on the installation.

WE ARE HERE TO SUPPORT YOU!

Further information or a personal consultation? Our products and know-how are there to provide solutions.

BRPV3-1000-12.5VG 1000V 12.5kA Type 1+2 PV Class I Class II SPD